Re: [Spca50x-devs] no accepting address and /dev/video0
- Date: Sun, 2 Apr 2006 13:12:55 +0100
- From: "Bjorn A Hauksson" <b.a.hauksson@xxxxxxxxx>
- Subject: Re: [Spca50x-devs] no accepting address and /dev/video0
Thanks for your replies.
Michel: I have basically tried everything I
can think of by now. I have tried both USB sockets and there are no
other USB devices connected (only my wireless card is connected). I
tried to connect my USB external hard drive
which works fine but the camera wont work. I created manually
/dev/video* directories, with
mknod /dev/video0 c 81 0
mknod /dev/video1 c 81 1
chmod a+rw /dev/video0
ln -s /dev/video0 /dev/video
as root. But that did not help.
When I google the error message
kernel: usb 2-1: new full speed USB device using uhci_hcd and address
usb 2-1: device not accepting address 58, error -71
it looks like a lot of people have had this error for many different
reasons, but I have not found a working fix for this. I have tried to
reinstall the spca5xx driver but that did not help. I have set the
permissions
I got this error when opening gnomemeeting (maybe this is relevant?):
Error while starting the listener
You will not be able to receive incoming calls. Please check that no
other program is already running on the port used by GnomeMeeting.
Might this (from linux-usb.org) be relevant:
A:In the 2.6.10 kernel the method of enumerating devices was changed
to follow a similar algorithm as Windows (while the standard allows
both many devices require the Windows method). It seems some devices
do not like this new method though. If you have started having a
problem since this kernel with some of your devices you might want to
use the option "old_scheme_first=y" with the usbcore module.
Finally, I am not sure that my /proc/bus/usb/devices file is showing
the correct info. It has three blocks of info even when no device is
connected to the computer. Should I perhaps delete all contents in
devices (but I am not sure how to do that, the file is probably
critical for running processes). The contents of devices is:
T: Bus=03 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 2.06
S: Manufacturer=Linux 2.6.12-1.1381_FC3 uhci_hcd
S: Product=UHCI Host Controller
S: SerialNumber=0000:00:1d.2
C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms
T: Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 2.06
S: Manufacturer=Linux 2.6.12-1.1381_FC3 uhci_hcd
S: Product=UHCI Host Controller
S: SerialNumber=0000:00:1d.1
C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms
T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 2.06
S: Manufacturer=Linux 2.6.12-1.1381_FC3 uhci_hcd
S: Product=UHCI Host Controller
S: SerialNumber=0000:00:1d.0
C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms
Thomas: I am not sure that the camera is already broken, I just
started using it, but I will test your thoery on Monday using Windows
and see if the camera works there.
Can you think of any more things to try. And can you recommend some
debug methods so I can look into this in more detail...
Thanks,
Bjorn.
- Show quoted text -
On 01/04/06, michel Xhaard <mxhaard@xxxxxxx> wrote:
> Le Samedi 1 Avril 2006 20:45, Bjorn A Hauksson a écrit:
> > Dear webcam experts,
> >
> > First after I installed the spca driver it worked fine in
> > gnomemeeting. Then two days later the camera stopped working. I get
> > the error device not accepting address in the system log (see below).
> > I have updated the kernel and tried changing the BIOS settings in line
> > with recommendation on http://www.linux-usb.org/FAQ.html#ts6 but
> > neither worked. I have tried to use modprobe spca5xx usbgrabber=1 as
> > recommended on
> > http://www.fedoraforum.org/forum/archive/index.php/t-54683.html, but it did
> > not help. I have tried to disable acpi but that did not work.
> >
> > Many thanks,
> > Bjorn.
> >
> > Kernel: 2.6.12.x
> > Webcam: Quickcam Express Logitech
> > OS: Fedora core 3
> > Driver: spca5xx-20060301
> >
> > System log:
> > Apr 1 15:37:33 localhost kernel: usb 2-1: new full speed USB device
> > using uhci_hcd and address 6
> > Apr 1 15:37:34 localhost kernel: usb 2-1: device descriptor read/64, error
> > -71 Apr 1 15:37:34 localhost kernel: usb 2-1: device descriptor read/64,
> > error -71 Apr 1 15:37:34 localhost kernel: usb 2-1: new full speed USB
> > device using uhci_hcd and address 7
> > Apr 1 15:37:34 localhost kernel: usb 2-1: device descriptor read/64, error
> > -71 Apr 1 15:37:34 localhost kernel: usb 2-1: device descriptor read/64,
> > error -71 Apr 1 15:37:34 localhost kernel: usb 2-1: new full speed USB
> > device using uhci_hcd and address 8
> > Apr 1 15:37:35 localhost kernel: usb 2-1: device not accepting
> > address 8, error -71
> > Apr 1 15:37:35 localhost kernel: usb 2-1: new full speed USB device
> > using uhci_hcd and address 9
> > Apr 1 15:37:35 localhost kernel: usb 2-1: device not accepting
> > address 9, error -71
> >
> > ################################
> >
> > When I tried using the spcaview I found out that /dev/video0 does not
> > exist, $ ll /dev/video0
> > ls: /dev/video0: No such file or directory
> >
> > [root@localhost webcam]# spcaview
> > Spcaview version: 1.1.5 date: 12:12:2005 (C) mxhaard@xxxxxxxx
> > Initializing SDL.
> > SDL initialized.
> > bpp 3 format 15
> > Using video device /dev/video0.
> > Initializing v4l.
> > ERROR opening V4L interface
> >
> > : No such file or directory
> >
> > ################################
> >
> >
> >
> > [root@localhost webcam]# /sbin/lsmod
> > Module Size Used by
> > spca5xx 679952 0
> > videodev 9537 1 spca5xx
> > nls_utf8 2113 1
> > i915 18753 1
> > drm 68949 2 i915
> > parport_pc 28293 1
> > lp 12873 0
> > parport 40073 2 parport_pc,lp
> > autofs4 28229 0
> > sunrpc 164229 1
> > orinoco_cs 10185 1
> > orinoco 54741 1 orinoco_cs
> > hermes 7105 2 orinoco_cs,orinoco
> > pcmcia 28897 3 orinoco_cs
> > ipt_REJECT 5441 1
> > ipt_state 1857 1
> > ip_conntrack 41369 1 ipt_state
> > iptable_filter 2881 1
> > ip_tables 19521 3 ipt_REJECT,ipt_state,iptable_filter
> > dm_mod 57333 0
> > video 15685 0
> > button 4033 0
> > battery 9285 0
> > ac 4805 0
> > md5 4033 1
> > ipv6 262977 10
> > yenta_socket 21705 2
> > rsrc_nonstatic 12737 1 yenta_socket
> > pcmcia_core 50013 4
> > orinoco_cs,pcmcia,yenta_socket,rsrc_nonstatic uhci_hcd 35025
> > 0
> > i2c_i801 8653 0
> > i2c_core 21313 1 i2c_i801
> > snd_intel8x0m 19333 2
> > snd_intel8x0 34177 2
> > snd_ac97_codec 74937 2 snd_intel8x0m,snd_intel8x0
> > snd_pcm_oss 50673 0
> > snd_mixer_oss 17729 3 snd_pcm_oss
> > snd_pcm 98889 4
> > snd_intel8x0m,snd_intel8x0,snd_ac97_codec,snd_pcm_oss
> > snd_timer 32837 1 snd_pcm
> > snd 57285 11
> > snd_intel8x0m,snd_intel8x0,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm
> >,snd _timer
> > soundcore 10785 3 snd
> > snd_page_alloc 9669 3 snd_intel8x0m,snd_intel8x0,snd_pcm
> > e100 48705 0
> > mii 5569 1 e100
> > floppy 64629 0
> > ext3 130633 3
> > jbd 83161 1 ext3
> >
> >
> > /proc/bus/usb/devices (when only the webcam connected to usb):
> > T: Bus=03 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
> > B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
> > D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
> > P: Vendor=0000 ProdID=0000 Rev= 2.06
> > S: Manufacturer=Linux 2.6.12-1.1381_FC3 uhci_hcd
> > S: Product=UHCI Host Controller
> > S: SerialNumber=0000:00:1d.2
> > C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr= 0mA
> > I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
> > E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms
> >
> > T: Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
> > B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
> > D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
> > P: Vendor=0000 ProdID=0000 Rev= 2.06
> > S: Manufacturer=Linux 2.6.12-1.1381_FC3 uhci_hcd
> > S: Product=UHCI Host Controller
> > S: SerialNumber=0000:00:1d.1
> > C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr= 0mA
> > I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
> > E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms
> >
> > T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
> > B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
> > D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
> > P: Vendor=0000 ProdID=0000 Rev= 2.06
> > S: Manufacturer=Linux 2.6.12-1.1381_FC3 uhci_hcd
> > S: Product=UHCI Host Controller
> > S: SerialNumber=0000:00:1d.0
> > C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr= 0mA
> > I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
> > E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms
> > ~
> >
> >
> > [root@localhost webcam]# vim /proc/bus/input/devices:
> >
> > I: Bus=0011 Vendor=0001 Product=0001 Version=ab41
> > N: Name="AT Translated Set 2 keyboard"
> > P: Phys=isa0060/serio0/input0
> > H: Handlers=kbd event0
> > B: EV=120013
> > B: KEY=4 2000078 3802078 f840d001 f2ffffdf ffefffff ffffffff fffffffe
> > B: MSC=10
> > B: LED=7
> >
> > I: Bus=0011 Vendor=0002 Product=0001 Version=0000
> > N: Name="PS/2 Generic Mouse"
> > P: Phys=isa0060/serio4/input0
> > H: Handlers=mouse0 event1
> > B: EV=7
> > B: KEY=70000 0 0 0 0 0 0 0 0
> > B: REL=3
> >
> >
> > [root@localhost webcam]# /sbin/lspci -vn:
> > 00:00.0 Class 0600: 8086:3575 (rev 04)
> > Subsystem: 1014:1017
> > Flags: bus master, fast devsel, latency 0
> > Memory at <unassigned> (32-bit, prefetchable)
> > Capabilities: [40] Vendor Specific Information
> >
> > 00:02.0 Class 0300: 8086:3577 (rev 04)
> > Subsystem: 1014:0505
> > Flags: bus master, fast devsel, latency 0, IRQ 11
> > Memory at 98000000 (32-bit, prefetchable) [size=128M]
> > Memory at 90100000 (32-bit, non-prefetchable) [size=512K]
> > Capabilities: [d0] Power Management version 1
> >
> > 00:02.1 Class 0380: 8086:3577
> > Subsystem: 1014:0505
> > Flags: bus master, fast devsel, latency 0
> > Memory at 88000000 (32-bit, prefetchable) [size=128M]
> > Memory at 80200000 (32-bit, non-prefetchable) [size=512K]
> > Capabilities: [d0] Power Management version 1
> >
> > 00:1d.0 Class 0c03: 8086:2482 (rev 02)
> > Subsystem: 1014:1017
> > Flags: bus master, medium devsel, latency 0, IRQ 11
> > I/O ports at a4a0 [size=32]
> >
> > 00:1d.1 Class 0c03: 8086:2484 (rev 02)
> > Subsystem: 1014:1017
> > Flags: bus master, medium devsel, latency 0, IRQ 11
> > I/O ports at a4e0 [size=32]
> >
> > 00:1d.1 Class 0c03: 8086:2484 (rev 02)
> > Subsystem: 1014:1017
> > Flags: bus master, medium devsel, latency 0, IRQ 11
> > I/O ports at a4e0 [size=32]
> >
> >
> > 00:1d.2 Class 0c03: 8086:2487 (rev 02)
> > Subsystem: 1014:1017
> > Flags: bus master, medium devsel, latency 0, IRQ 11
> > I/O ports at a800 [size=32]
> >
> > 00:1e.0 Class 0604: 8086:2448 (rev 42)
> > Flags: bus master, fast devsel, latency 0
> > Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
> > I/O behind bridge: 00007000-00007fff
> > Memory behind bridge: 80100000-801fffff
> >
> > 00:1f.0 Class 0601: 8086:248c (rev 02)
> > Flags: bus master, medium devsel, latency 0
> >
> > 00:1f.1 Class 0101: 8086:248a (rev 02) (prog-if 8a [Master SecP PriP])
> > Subsystem: 1014:1017
> > Flags: bus master, medium devsel, latency 0, IRQ 255
> > I/O ports at <ignored>
> > I/O ports at <ignored>
> > I/O ports at <ignored>
> > I/O ports at <ignored>
> > I/O ports at a890 [size=16]
> > Memory at 10000000 (32-bit, non-prefetchable) [size=1K]
> >
> >
> >
> >
> >
> > 00:1f.3 Class 0c05: 8086:2483 (rev 02)
> > Subsystem: 1014:1017
> > Flags: medium devsel, IRQ 11
> > I/O ports at 8000 [size=32]
> >
> > 00:1f.5 Class 0401: 8086:2485 (rev 02)
> > Subsystem: 1014:0500
> > Flags: bus master, medium devsel, latency 0, IRQ 11
> > I/O ports at 9800 [size=256]
> > I/O ports at 9c00 [size=64]
> >
> > 00:1f.6 Class 0703: 8086:2486 (rev 02)
> > Subsystem: 1014:0503
> > Flags: bus master, medium devsel, latency 0, IRQ 11
> > I/O ports at a000 [size=256]
> > I/O ports at a400 [size=128]
> >
> > 01:08.0 Class 0200: 8086:1031 (rev 42)
> > Subsystem: 1014:1031
> > Flags: bus master, medium devsel, latency 66, IRQ 11
> > Memory at 80100000 (32-bit, non-prefetchable) [size=4K]
> > I/O ports at 7000 [size=64]
> > Capabilities: [dc] Power Management version 2
> >
> > 01:09.0 Class 0607: 104c:ac50 (rev 02)
> > Subsystem: 1014:1017
> > Flags: bus master, medium devsel, latency 168, IRQ 11
> > Memory at 10001000 (32-bit, non-prefetchable) [size=4K]
> > Bus: primary=01, secondary=02, subordinate=05, sec-latency=176
> > Memory window 0: 10400000-107ff000 (prefetchable)
> > Memory window 1: 10800000-10bff000
> > I/O window 0: 00004000-000040ff
> > I/O window 1: 00004400-000044ff
> > 16-bit legacy interface ports at 0001
> >
> >
> Bjorn,
> usbgrabber=1 is only usefull if your webcam is a Intel one or you used a usb
> to video adaptator .
> the problem with error -71 (protocol error) seem to be a problem with the usb
> layer.
> have you try to change the usb socket ?
> Is there some others usb devices connected ? try to remove all
> have you try to used a usb key for example to see if your usb is working ?
> regards
> --
> Michel Xhaard
> http://mxhaard.free.fr
>
>
> -------------------------------------------------------
> This SF.Net email is sponsored by xPML, a groundbreaking scripting language
> that extends applications into web and mobile media. Attend the live webcast
> and join the prime developer group breaking into this new coding territory!
> http://sel.as-us.falkag.net/sel?cmdlnk&kid0944&bid$1720&dat1642
> _______________________________________________
> Spca50x-devs mailing list
> Spca50x-devs@xxxxxxxxxxxxxxxxxxxxx
> https://lists.sourceforge.net/lists/listinfo/spca50x-devs
>
Reply Forward
Bjorn A Hauksson
to spca50x-devs
More options 03:29 (9 hours ago)
I got this error when opening gnomemeeting (maybe this is relevant?):
Error while starting the listener
You will not be able to receive incoming calls. Please check that no
other program is already running on the port used by GnomeMeeting.
Might this (from linux-usb.org) be relevant:
A:In the 2.6.10 kernel the method of enumerating devices was changed
to follow a similar algorithm as Windows (while the standard allows
both many devices require the Windows method). It seems some devices
do not like this new method though. If you have started having a
problem since this kernel with some of your devices you might want to
use the option "old_scheme_first=y" with the usbcore module.
Finally, I am not sure that my /proc/bus/usb/devices file is showing
the correct info. It has three blocks of info even when no device is
connected to the computer. Should I perhaps delete all contents in
devices (but I am not sure how to do that, the file is probably
critical for running processes). The contents of devices is:
- Show quoted text -
T: Bus=03 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 2.06
S: Manufacturer=Linux 2.6.12-1.1381_FC3 uhci_hcd
S: Product=UHCI Host Controller
S: SerialNumber=0000:00:1d.2
C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms
T: Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 2.06
S: Manufacturer=Linux 2.6.12-1.1381_FC3 uhci_hcd
S: Product=UHCI Host Controller
S: SerialNumber=0000:00:1d.1
C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms
T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 2.06
S: Manufacturer=Linux 2.6.12-1.1381_FC3 uhci_hcd
S: Product=UHCI Host Controller
S: SerialNumber=0000:00:1d.0
C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms
Thanks,
Bjorn.
On 01/04/06, michel Xhaard <mxhaard@xxxxxxx> wrote:
> Le Samedi 1 Avril 2006 20:45, Bjorn A Hauksson a écrit:
> > Dear webcam experts,
> >
> > First after I installed the spca driver it worked fine in
> > gnomemeeting. Then two days later the camera stopped working. I get
> > the error device not accepting address in the system log (see below).
> > I have updated the kernel and tried changing the BIOS settings in line
> > with recommendation on http://www.linux-usb.org/FAQ.html#ts6 but
> > neither worked. I have tried to use modprobe spca5xx usbgrabber=1 as
> > recommended on
> > http://www.fedoraforum.org/forum/archive/index.php/t-54683.html, but it did
> > not help. I have tried to disable acpi but that did not work.
> >
> > Many thanks,
> > Bjorn.
> >
> > Kernel: 2.6.12.x
> > Webcam: Quickcam Express Logitech
> > OS: Fedora core 3
> > Driver: spca5xx-20060301
> >
> > System log:
> > Apr 1 15:37:33 localhost kernel: usb 2-1: new full speed USB device
> > using uhci_hcd and address 6
> > Apr 1 15:37:34 localhost kernel: usb 2-1: device descriptor read/64, error
> > -71 Apr 1 15:37:34 localhost kernel: usb 2-1: device descriptor read/64,
> > error -71 Apr 1 15:37:34 localhost kernel: usb 2-1: new full speed USB
> > device using uhci_hcd and address 7
> > Apr 1 15:37:34 localhost kernel: usb 2-1: device descriptor read/64, error
> > -71 Apr 1 15:37:34 localhost kernel: usb 2-1: device descriptor read/64,
> > error -71 Apr 1 15:37:34 localhost kernel: usb 2-1: new full speed USB
> > device using uhci_hcd and address 8
> > Apr 1 15:37:35 localhost kernel: usb 2-1: device not accepting
> > address 8, error -71
> > Apr 1 15:37:35 localhost kernel: usb 2-1: new full speed USB device
> > using uhci_hcd and address 9
> > Apr 1 15:37:35 localhost kernel: usb 2-1: device not accepting
> > address 9, error -71
> >
> > ################################
> >
> > When I tried using the spcaview I found out that /dev/video0 does not
> > exist, $ ll /dev/video0
> > ls: /dev/video0: No such file or directory
> >
> > [root@localhost webcam]# spcaview
> > Spcaview version: 1.1.5 date: 12:12:2005 (C) mxhaard@xxxxxxxx
> > Initializing SDL.
> > SDL initialized.
> > bpp 3 format 15
> > Using video device /dev/video0.
> > Initializing v4l.
> > ERROR opening V4L interface
> >
> > : No such file or directory
> >
> > ################################
> >
> >
> >
> > [root@localhost webcam]# /sbin/lsmod
> > Module Size Used by
> > spca5xx 679952 0
> > videodev 9537 1 spca5xx
> > nls_utf8 2113 1
> > i915 18753 1
> > drm 68949 2 i915
> > parport_pc 28293 1
> > lp 12873 0
> > parport 40073 2 parport_pc,lp
> > autofs4 28229 0
> > sunrpc 164229 1
> > orinoco_cs 10185 1
> > orinoco 54741 1 orinoco_cs
> > hermes 7105 2 orinoco_cs,orinoco
> > pcmcia 28897 3 orinoco_cs
> > ipt_REJECT 5441 1
> > ipt_state 1857 1
> > ip_conntrack 41369 1 ipt_state
> > iptable_filter 2881 1
> > ip_tables 19521 3 ipt_REJECT,ipt_state,iptable_filter
> > dm_mod 57333 0
> > video 15685 0
> > button 4033 0
> > battery 9285 0
> > ac 4805 0
> > md5 4033 1
> > ipv6 262977 10
> > yenta_socket 21705 2
> > rsrc_nonstatic 12737 1 yenta_socket
> > pcmcia_core 50013 4
> > orinoco_cs,pcmcia,yenta_socket,rsrc_nonstatic uhci_hcd 35025
> > 0
> > i2c_i801 8653 0
> > i2c_core 21313 1 i2c_i801
> > snd_intel8x0m 19333 2
> > snd_intel8x0 34177 2
> > snd_ac97_codec 74937 2 snd_intel8x0m,snd_intel8x0
> > snd_pcm_oss 50673 0
> > snd_mixer_oss 17729 3 snd_pcm_oss
> > snd_pcm 98889 4
> > snd_intel8x0m,snd_intel8x0,snd_ac97_codec,snd_pcm_oss
> > snd_timer 32837 1 snd_pcm
> > snd 57285 11
> > snd_intel8x0m,snd_intel8x0,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm
> >,snd _timer
> > soundcore 10785 3 snd
> > snd_page_alloc 9669 3 snd_intel8x0m,snd_intel8x0,snd_pcm
> > e100 48705 0
> > mii 5569 1 e100
> > floppy 64629 0
> > ext3 130633 3
> > jbd 83161 1 ext3
> >
> >
> > /proc/bus/usb/devices (when only the webcam connected to usb):
> > T: Bus=03 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
> > B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
> > D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
> > P: Vendor=0000 ProdID=0000 Rev= 2.06
> > S: Manufacturer=Linux 2.6.12-1.1381_FC3 uhci_hcd
> > S: Product=UHCI Host Controller
> > S: SerialNumber=0000:00:1d.2
> > C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr= 0mA
> > I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
> > E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms
> >
> > T: Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
> > B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
> > D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
> > P: Vendor=0000 ProdID=0000 Rev= 2.06
> > S: Manufacturer=Linux 2.6.12-1.1381_FC3 uhci_hcd
> > S: Product=UHCI Host Controller
> > S: SerialNumber=0000:00:1d.1
> > C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr= 0mA
> > I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
> > E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms
> >
> > T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
> > B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
> > D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
> > P: Vendor=0000 ProdID=0000 Rev= 2.06
> > S: Manufacturer=Linux 2.6.12-1.1381_FC3 uhci_hcd
> > S: Product=UHCI Host Controller
> > S: SerialNumber=0000:00:1d.0
> > C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr= 0mA
> > I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
> > E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms
> > ~
> >
> >
> > [root@localhost webcam]# vim /proc/bus/input/devices:
> >
> > I: Bus=0011 Vendor=0001 Product=0001 Version=ab41
> > N: Name="AT Translated Set 2 keyboard"
> > P: Phys=isa0060/serio0/input0
> > H: Handlers=kbd event0
> > B: EV=120013
> > B: KEY=4 2000078 3802078 f840d001 f2ffffdf ffefffff ffffffff fffffffe
> > B: MSC=10
> > B: LED=7
> >
> > I: Bus=0011 Vendor=0002 Product=0001 Version=0000
> > N: Name="PS/2 Generic Mouse"
> > P: Phys=isa0060/serio4/input0
> > H: Handlers=mouse0 event1
> > B: EV=7
> > B: KEY=70000 0 0 0 0 0 0 0 0
> > B: REL=3
> >
> >
> > [root@localhost webcam]# /sbin/lspci -vn:
> > 00:00.0 Class 0600: 8086:3575 (rev 04)
> > Subsystem: 1014:1017
> > Flags: bus master, fast devsel, latency 0
> > Memory at <unassigned> (32-bit, prefetchable)
> > Capabilities: [40] Vendor Specific Information
> >
> > 00:02.0 Class 0300: 8086:3577 (rev 04)
> > Subsystem: 1014:0505
> > Flags: bus master, fast devsel, latency 0, IRQ 11
> > Memory at 98000000 (32-bit, prefetchable) [size=128M]
> > Memory at 90100000 (32-bit, non-prefetchable) [size=512K]
> > Capabilities: [d0] Power Management version 1
> >
> > 00:02.1 Class 0380: 8086:3577
> > Subsystem: 1014:0505
> > Flags: bus master, fast devsel, latency 0
> > Memory at 88000000 (32-bit, prefetchable) [size=128M]
> > Memory at 80200000 (32-bit, non-prefetchable) [size=512K]
> > Capabilities: [d0] Power Management version 1
> >
> > 00:1d.0 Class 0c03: 8086:2482 (rev 02)
> > Subsystem: 1014:1017
> > Flags: bus master, medium devsel, latency 0, IRQ 11
> > I/O ports at a4a0 [size=32]
> >
> > 00:1d.1 Class 0c03: 8086:2484 (rev 02)
> > Subsystem: 1014:1017
> > Flags: bus master, medium devsel, latency 0, IRQ 11
> > I/O ports at a4e0 [size=32]
> >
> > 00:1d.1 Class 0c03: 8086:2484 (rev 02)
> > Subsystem: 1014:1017
> > Flags: bus master, medium devsel, latency 0, IRQ 11
> > I/O ports at a4e0 [size=32]
> >
> >
> > 00:1d.2 Class 0c03: 8086:2487 (rev 02)
> > Subsystem: 1014:1017
> > Flags: bus master, medium devsel, latency 0, IRQ 11
> > I/O ports at a800 [size=32]
> >
> > 00:1e.0 Class 0604: 8086:2448 (rev 42)
> > Flags: bus master, fast devsel, latency 0
> > Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
> > I/O behind bridge: 00007000-00007fff
> > Memory behind bridge: 80100000-801fffff
> >
> > 00:1f.0 Class 0601: 8086:248c (rev 02)
> > Flags: bus master, medium devsel, latency 0
> >
> > 00:1f.1 Class 0101: 8086:248a (rev 02) (prog-if 8a [Master SecP PriP])
> > Subsystem: 1014:1017
> > Flags: bus master, medium devsel, latency 0, IRQ 255
> > I/O ports at <ignored>
> > I/O ports at <ignored>
> > I/O ports at <ignored>
> > I/O ports at <ignored>
> > I/O ports at a890 [size=16]
> > Memory at 10000000 (32-bit, non-prefetchable) [size=1K]
> >
> >
> >
> >
> >
> > 00:1f.3 Class 0c05: 8086:2483 (rev 02)
> > Subsystem: 1014:1017
> > Flags: medium devsel, IRQ 11
> > I/O ports at 8000 [size=32]
> >
> > 00:1f.5 Class 0401: 8086:2485 (rev 02)
> > Subsystem: 1014:0500
> > Flags: bus master, medium devsel, latency 0, IRQ 11
> > I/O ports at 9800 [size=256]
> > I/O ports at 9c00 [size=64]
> >
> > 00:1f.6 Class 0703: 8086:2486 (rev 02)
> > Subsystem: 1014:0503
> > Flags: bus master, medium devsel, latency 0, IRQ 11
> > I/O ports at a000 [size=256]
> > I/O ports at a400 [size=128]
> >
> > 01:08.0 Class 0200: 8086:1031 (rev 42)
> > Subsystem: 1014:1031
> > Flags: bus master, medium devsel, latency 66, IRQ 11
> > Memory at 80100000 (32-bit, non-prefetchable) [size=4K]
> > I/O ports at 7000 [size=64]
> > Capabilities: [dc] Power Management version 2
> >
> > 01:09.0 Class 0607: 104c:ac50 (rev 02)
> > Subsystem: 1014:1017
> > Flags: bus master, medium devsel, latency 168, IRQ 11
> > Memory at 10001000 (32-bit, non-prefetchable) [size=4K]
> > Bus: primary=01, secondary=02, subordinate=05, sec-latency=176
> > Memory window 0: 10400000-107ff000 (prefetchable)
> > Memory window 1: 10800000-10bff000
> > I/O window 0: 00004000-000040ff
> > I/O window 1: 00004400-000044ff
> > 16-bit legacy interface ports at 0001
> >
> >
> Bjorn,
> usbgrabber=1 is only usefull if your webcam is a Intel one or you used a usb
> to video adaptator .
> the problem with error -71 (protocol error) seem to be a problem with the usb
> layer.
> have you try to change the usb socket ?
> Is there some others usb devices connected ? try to remove all
> have you try to used a usb key for example to see if your usb is working ?
> regards
> --
> Michel Xhaard
> http://mxhaard.free.fr
>
>
> -------------------------------------------------------
> This SF.Net email is sponsored by xPML, a groundbreaking scripting language
> that extends applications into web and mobile media. Attend the live webcast
> and join the prime developer group breaking into this new coding territory!
> http://sel.as-us.falkag.net/sel?cmdlnk&kid0944&bid$1720&dat1642
> _______________________________________________
> Spca50x-devs mailing list
> Spca50x-devs@xxxxxxxxxxxxxxxxxxxxx
> https://lists.sourceforge.net/lists/listinfo/spca50x-devs
>
-------------------------------------------------------
This SF.Net email is sponsored by xPML, a groundbreaking scripting language
that extends applications into web and mobile media. Attend the live webcast
and join the prime developer group breaking into this new coding territory!
http://sel.as-us.falkag.net/sel?cmd=lnk&kid0944&bid$1720&dat1642
_______________________________________________
Spca50x-devs mailing list
Spca50x-devs@xxxxxxxxxxxxxxxxxxxxx
https://lists.sourceforge.net/lists/listinfo/spca50x-devs