Re: [Spca50x-devs] Z-Star 305b causes system lockup

[michel Xhaard <mxhaard@xxxxxxxx>]

Le Jeudi 15 Juin 2006 21:13, David Stone a écrit :
> Overworked driver developers,
>
> I have been trying unsuccessfully to get my Z-Star camera to work.
> Everytime I launch any webcam  application it locks up the whole system.
> I am running Ubuntu 6.06 with the included kernel 2.6.15-23.
>
> Output from lsusb:
> Bus 002 Device 003: ID 0ac8:305b Z-Star Microelectronics Corp.
This chipset is know as VM0305 and should be supported by spca5xx.
> I have tried versions 20060501 20060402 20060301 20051212 all of them
> produce the same result. They compile fine and the module loads fine but
> it locks up once I try to use it. I am using gcc 4.0.3.
>
> In most recently try I compiled my own kernel using vinella kernel
> source 2.6.16.20 and the latest spca5xx version (20060501). It still had
> the same result of locking  up the computer when I tried to use the
> webcam. I loaded the module with debug support so you can see everything
> it says. The output from dmesg after the module is loaded is below. The
> only thing that seams to indicate in trouble is the line:
> [4295253.758000] /home/dave/spca5xx-20060501/drivers/usb/zc3xx.h:
> [zc3xx_config:487] Find Sensor UNKNOW_0 force Tas5130
I have download the windoze driver seem the chips is only set with a Tas5130c 
so that sensor detection seem good.
> I'm not sure if that is important. You can find information about the
> manufaturer of this camera at:
> http://www.kinamax.com/product/Item/WCM-NV13.htm
> if it helps you can get windows drivers here:
> http://www.kinamax.com/drivers/wcm-nv13.zip
>
> Thanks so much for looking at this. If I can do anything to help let me
> know.
> David Stone
did not know what is going wrong sorry :(
Michel Xhaard
http://mxhaard.free.fr



_______________________________________________
Spca50x-devs mailing list
Spca50x-devs@xxxxxxxxxxxxxxxxxxxxx
https://lists.sourceforge.net/lists/listinfo/spca50x-devs