pv951 based card, ir - sound problem
- Date: Sun, 27 Jan 2008 18:23:01 +0100
- From: juuzer <juuzerdcs@xxxxxxxxx>
- Subject: pv951 based card, ir - sound problem
Hi!
Ive got a little problem on my pv951 based card. The card dont detect
automaticaly, so i use some options for bttv.
modprobe bttv card=42 tuner=28 radio=1 i2c_udelay=16
Linux video capture interface: v2.00
bttv: driver version 0.9.17 loaded
bttv: using 8 buffers with 2080k (520 pages) each for capture
bttv: Bt8xx card found (0).
bttv0: Bt878 (rev 17) at 0000:05:08.0, irq: 21, latency: 32, mmio:
0xc2100000 bttv0: using: ProVideo PV951 [card=42,insmod option]
bttv0: gpio: en=00000000, out=00000000 in=00ffffff [init]
bttv0: using tuner=28
tvaudio 2-004b: pic16c54 (PV951) found @ 0x96 (bt878 #0 [sw])
bttv0: i2c: checking for TDA9887 @ 0x86... not found
tuner 2-0060: All bytes are equal. It is not a TEA5767
tuner 2-0060: chip found @ 0xc0 (bt878 #0 [sw])
tuner 2-0060: type set to 28 (LG PAL_BG+FM (TPI8PSB01D))
tuner 2-0060: type set to 28 (LG PAL_BG+FM (TPI8PSB01D))
bttv0: registered device video0
bttv0: registered device vbi0
bttv0: registered device radio0
bttv0: PLL: 28636363 => 35468950 . ok
when i load the ir-kbd-i2c helper modul that recognize the ir but dont
create input files
ir-kbd-i2c: probe 0x1a @ bt878 #0 [sw]: no
ir-kbd-i2c: probe 0x18 @ bt878 #0 [sw]: no
ir-kbd-i2c: probe 0x4b @ bt878 #0 [sw]: yes
if unload the tvaudio ir-kbd-i2c, and reload ir-kbd-i2c without tvaudio
modul than the ir work
rmmod tvaudio ir-kbd-i2c
modprobe ir-kbd-i2c debug=1
ir-kbd-i2c: probe 0x1a @ bt878 #0 [sw]: no
ir-kbd-i2c: probe 0x18 @ bt878 #0 [sw]: no
ir-kbd-i2c: probe 0x4b @ bt878 #0 [sw]: yes
input: i2c IR (PV951) as /class/input/input6
ir-kbd-i2c: i2c IR (PV951) detected at i2c-2/2-004b/ir0 [bt878 #0 [sw]]
if reload the tvaudio when ir is registered that dont work
modprobe tvaudio debug=1
tvaudio: TV audio decoder + audio/video mux driver
tvaudio: known chips: tda9840, tda9873h, tda9874h/a, tda9850, tda9855,tea6300, tea6320, tea6420, tda8425, pic16c54 (PV951), ta8874z
The ir and sound dont work at same time. Work with older kernel
(2.6.19 and older).
--
video4linux-list mailing list
Unsubscribe mailto:video4linux-list-request@xxxxxxxxxx?subject=unsubscribe
https://www.redhat.com/mailman/listinfo/video4linux-list