Re: [EXPERIMENTAL] cx88+xc3028 - tests are required - was: Re: When xc3028/xc2028 will be supported?

[Adam Pribyl <pribyl@xxxxxxxxxxx>]

I tried latest hg version on LifeView NOT PCI Hybrid! LV3H and fw version 
27 from linuxtv web. It is now loading the firmware but the result is like 
that:

cx88/0: cx2388x v4l2 driver version 0.0.6 loaded
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10
ACPI: PCI Interrupt 0000:00:10.0[A] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10
cx88[0]: subsystem: 14f1:8852, board: Geniatech X8000-MT DVBT [card=63,autodetected]
cx88[0]: TV tuner type 71, Radio tuner type 0
cx88/2: cx2388x MPEG-TS Driver Manager version 0.0.6 loaded
tuner' 1-0061: chip found @ 0xc2 (cx88[0])
xc2028 1-0061: type set to XCeive xc2028/xc3028 tuner
xc2028 1-0061: xc2028/3028 firmware name not set!
cx88[0]: Asking xc2028/3028 to load firmware xc3028-v27.fw
cx88[0]/0: found at 0000:00:10.0, rev: 5, irq: 10, latency: 64, mmio: 
0xdc000000
cx88[0]/0: registered device video0 [v4l2]
cx88[0]/0: registered device vbi0
cx88[0]/0: registered device radio0
xc2028 1-0061: Loading 80 firmware images from xc3028-v27.fw, type: xc2028 
firmware, ver 2.7
cx88[0]: Calling XC2028/3028 callback
xc2028 1-0061: Loading firmware for type=BASE MTS (5), id 0000000000000000.
cx88[0]: Calling XC2028/3028 callback
cx2388x alsa driver version 0.0.6 loaded
xc2028 1-0061: Loading firmware for type=MTS (4), id 000000000000b700.
xc2028 1-0061: Device is Xceive 3028 version 1.0, firmware version 2.7
cx88[0]: Calling XC2028/3028 callback
cx88[0]/2: cx2388x 8802 Driver Manager
cx88[0]/2: found at 0000:00:10.2, rev: 5, irq: 10, latency: 64, mmio: 0xde000000
Vortex: init.... <6>cx88/2: cx2388x dvb driver version 0.0.6 loaded
cx88/2: registering cx8802 driver, type: dvb access: shared
cx88[0]/2: subsystem: 14f1:8852, board: Geniatech X8000-MT DVBT [card=63]
cx88[0]/2: cx2388x based DVB/ATSC card
xc2028 1-0061: type set to XCeive xc2028/xc3028 tuner
cx88[0]/2: xc3028 attached
DVB: registering new adapter (cx88[0])
DVB: registering frontend 0 (Zarlink ZL10353 DVB-T)...

...
cx88[0]: irq aud [0x1001] dn_risci1* dn_sync*
cx88[0]: irq aud [0x1001] dn_risci1* dn_sync*
cx88[0]: irq aud [0x1001] dn_risci1* dn_sync*
...
cx88[0]/1: IRQ loop detected, disabling interrupts
cx88[0]: irq aud [0x1101] dn_risci1* dnf_of dn_sync*
cx88[0]: Calling XC2028/3028 callback
xc2028 1-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 
0000000000000000.
cx88[0]: Calling XC2028/3028 callback
MTS (4), id 00000000000000f7:
xc2028 1-0061: Loading firmware for type=MTS (4), id 0000000100000007.
xc2028 1-0061: Device is Xceive 0 version 0.0, firmware version 0.0
xc2028 1-0061: Incorrect readback of firmware version.
cx88[0]: Calling XC2028/3028 callback
xc2028 1-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 
0000000000000000.
cx88[0]: Calling XC2028/3028 callback
i2c-adapter i2c-1: sendbytes: error - bailout.
xc2028 1-0061: i2c output error: rc = -14 (should be 4)
xc2028 1-0061: -14 returned from send
xc2028 1-0061: Error -22 while loading base firmware
cx88[0]: Calling XC2028/3028 callback
xc2028 1-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 
0000000000000000.
...

In windows driver there is no cx88*.sys, there is just av88base.sys md5 
dcc17e434bd3863e458dc19eac3359ea

Adam Pribyl

--
video4linux-list mailing list
Unsubscribe mailto:video4linux-list-request@xxxxxxxxxx?subject=unsubscribe
https://www.redhat.com/mailman/listinfo/video4linux-list