Re: [BUG] HVR-1500 Hot swap causes lockup

[Jon Lowe <jonlowe@xxxxxxx>]

This is my original bug report:
"?Hope this is the right place to do this.

Hauppauge HVR-1500 Expresscard, Ubuntu 8.04, latest V4L drivers.

Removing (hotswap) this card from a ASUS F3SV laptop running Ubuntu 8.04 causes 
a hard lock up of the computer. ?Unresponsive to any input. Requires complete 
shutdown of the computer and restart. ?Easily repeatable. Same card is hot 
swappable under Windows Vista. 

This is critical because Expresscards are notoriously easy to dislodge in 
notebooks."

I put this in the V4L list as it happens with my particular card after I installed the drviers for the card.

I have an eSata Expresscard also, I guess I ought to try that and see what happens.

Does any one know if the hotswap drivers are sinstalled with Ubuntu?


Jon Lowe



Jon Lowe


-----Original Message-----
From: Kristen Carlson Accardi <kristen.c.accardi@xxxxxxxxx>
To: Jon Lowe <jonlowe@xxxxxxx>
Cc: mkrufky@xxxxxxxxxxx; greg@xxxxxxxxx; stoth@xxxxxxxxxxx; brandon@xxxxxxxx; video4linux-list@xxxxxxxxxx
Sent: Thu, 24 Apr 2008 2:49 pm
Subject: Re: [BUG] HVR-1500 Hot swap causes lockup



On Thu, 24 Apr 2008 15:27:03 -0400
Jon Lowe <jonlowe@xxxxxxx> wrote:

> Hi,
> I started this mess.? Is there anything I can/should do wth my ASUS laptop to 
test the Expresscard slot as you are trying to do?? It works under Vista.? I 
will need instructions on how to install either the pciehp or aciphp driver.? I 
assume that these don't auto install under Ubuntu 8.04?
> 
> Also, my original problem was removing the card, and my laptop crashing.
> 
> 
> Jon Lowe

Hi Jon - if you want to use the Ubuntu kernel - you'll need to file a
bug with Ubuntu.  If you are willing to test with a kernel.org kernel,
then I can help you.  Perhaps you can resend your problem description
if it is different than Mike's, as I'm not really able to make out 
what is going on from the discussion below.

Kristen

> 
> 
> -----Original Message-----
> From: Kristen Carlson Accardi <kristen.c.accardi@xxxxxxxxx>
> To: mkrufky@xxxxxxxxxxx
> Cc: greg@xxxxxxxxx; jonlowe@xxxxxxx; stoth@xxxxxxxxxxx; brandon@xxxxxxxx; 
video4linux-list@xxxxxxxxxx
> Sent: Thu, 24 Apr 2008 2:02 pm
> Subject: Re: [BUG] HVR-1500 Hot swap causes lockup
> 
> 
> 
> On Thu, 24 Apr 2008 14:43:54 -0400
> mkrufky@xxxxxxxxxxx wrote:
> 
> > Greg KH wrote:
> > > On Thu, Apr 24, 2008 at 02:10:47PM -0400, mkrufky@xxxxxxxxxxx wrote:
> > >   
> > >> Greg KH wrote:
> > >>     
> > >>> On Thu, Apr 24, 2008 at 10:40:24AM -0400, Michael Krufky wrote:
> > >>>   
> > >>>       
> > >>>> On Thu, Apr 24, 2008 at 10:32 AM, Jon Lowe <jonlowe@xxxxxxx> wrote:
> > >>>>     
> > >>>>         
> > >>>>> While not exactly the same, this bug MAY be related to my hot swap
> > >>>>>           
> > >> poblem:
> > >>     
> > >> https://bugs.launchpad.net/ubuntu/+source/linux-source-2.6.15/+bug/12519
> > >>     
> > >>>>>       
> > >>>>>           
> > >>>> No relation.  Also, we're in 2.6.26 development, most 2.6.15 bugs are
> > >>>> entirely irrelevant.
> > >>>>
> > >>>> The problem is PCIe hotplugging  -- it doesn't work in Linux, at
> > >>>> least, not with Expresscards.  This issue is not specific to the
> > >>>> HVR1500 -- you'll see it on other similar Expresscards as well.
> > >>>>     
> > >>>>         
> > >>> Huh?  We had expresscard hotplugging working in Linux before any other
> > >>> operating system ever did.  It works for me just fine here on many
> > >>> machines, and does so for many thousands of users.
> > >>>
> > >>>   
> > >>>       
> > >>>> I can only get the HVR1500 / HVR1500Q / HVR1400 to come up properly if
> > >>>> it is installed in the system when I boot up the PC.  Inserting it
> > >>>> after boot does absolutely nothing, and removing it after you booted
> > >>>> the system with it installed will leave the system unstable.
> > >>>>     
> > >>>>         
> > >>> Have you actually loaded the pci hotplug controller driver that is
> > >>> needed to get hotplugging of express cards to work properly?  :)
> > >>>   
> > >>>       
> > >> This is what I see upon insertion of an HVR1500 with pciehp loaded:
> > >>
> > >> [  122.798217] pciehp: HPC vendor_id 8086 device_id 2a01 ss_vid 0 ss_did
> > 0
> > >> [  122.798457] Evaluate _OSC Set fails. Status = 0x0005
> > >> [  122.798492] Evaluate _OSC Set fails. Status = 0x0005
> > >> [  122.798514] pciehp: Cannot get control of hotplug hardware for pci
> > 0000:00:01.0
> > >> [  122.798662] pciehp: HPC vendor_id 8086 device_id 283f ss_vid 0 ss_did
> > 0
> > >> [  122.798705] Evaluate _OSC Set fails. Status = 0x0005
> > >> [  122.798735] Evaluate _OSC Set fails. Status = 0x0005
> > >> [  122.798758] pciehp: Cannot get control of hotplug hardware for pci
> > 0000:00:1c.0
> > >>     
> > >
> > > This really looks like your BIOS does not support PCI Hotplug of your
> > > express cards.
> > >
> > > But I'm adding Kristen to the CC: as she is the PCI Hotplug maintainer
> > > of the kernel, and she knows this way better than I do.
> > >
> > > Also, have you tried the acpiphp driver?  That might be the one your
> > > hardware needs instead.
> > >
> > > thanks,
> > >
> > > greg k-h
> > >   
> > acpiphp gives me the following:
> > 
> > [  264.251609] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
> > [  264.282563] acpiphp_glue: can't get bus number, assuming 0
> > [  264.282729] decode_hpp: Could not get hotplug parameters. Use defaults
> > [  264.282783] acpiphp: Slot [1] registered
> > [  265.125349] cx23885 driver version 0.0.1 loaded
> > 
> > I loaded the cx23885 driver, but it did not pick up on the hardware, nor 
> > do I see the expresscard listed in lspci.
> > 
> > The BIOS on my laptop definitely does support hotplug of my 
> > expresscards.  It works in Windows Vista (yuck)
> > 
> > To get a better idea about my Dell Latitude D830 laptop configuration, 
> > I've included full dmesg dump (please see attached)
> > 
> > Thank you for looking into this.
> > 
> > Regards,
> > 
> > Mike
> > 
> 
> Hi - it does look like your laptop might only supports acpi based hotplug, 
> since it looks like the pciehp driver is failing to switch into native pcie 
> mode due to lack of firmware support.  please send your acpi DSDT table
> so I can confirm that native pcie is not supported - and then we can
> debug why acpiphp isn't working for you.
> 
> Kristen
> 

--
video4linux-list mailing list
Unsubscribe mailto:video4linux-list-request@xxxxxxxxxx?subject=unsubscribe
https://www.redhat.com/mailman/listinfo/video4linux-list