FW: Trying to set up a NPG Real DVB-T PCI Card

[Vicent Jordà <vjorda@xxxxxxxxxxx>]

Sorry, I resend this message because I've received response. 
> From: vjorda@xxxxxxxxxxx> To: video4linux-list@xxxxxxxxxx> Date: Tue, 29 Apr 2008 11:25:46 +0000> Subject: RE: Trying to set up a NPG Real DVB-T PCI Card> > > I'm not sure that I have understoo your instructions.> > I've made three state dumps.> > 1) When The TV Program isn't running.> 2) When I turned on the TV Program> 3) When I selected a channel.> > I cannot change to NTSC.> > I hope this may help us!> > Thanks> Vicent> > CX2388x Card [0]:> > Vendor ID: 0x14f1> Device ID: 0x8800> Subsystem ID: 0x885214f1> > > 4 states dumped> > ----------------------------------------------------------------------------------> > CX2388x Card - State 0:> MO_GP0_IO: 000000ff * (00000000 00000000 00000000 11111111) > MO_GP1_IO: 0000e09f * (00000000 00000000 11100000 10011111) > MO_GP2_IO: 000000ff * (00000000 00000000 00000000 11111111) > MO_GP3_IO: 00000000 (00000000 00000000 00000000 00000000) > > > Changes: State 0 -> State 1:> AUD_STATUS: 000002ba -> 000001f6 (-------- -------- ------10 -0--10--) > AUD_NICAM_STATUS1: 000067bc -> 0000ef4d (-------- -------- 0---0--- 1011---0) > MO_GP0_IO: 000000ff -> 000004fb (-------- -------- -----0-- -----1--) > MO_GP1_IO: 0000e09f -> 0000f39e (-------- -------- ---0--00 -------1) > MO_GP2_IO: 000000ff -> 000000a9 (-------- -------- -------- -1-1-11-) > > 5 changes> > > ----------------------------------------------------------------------------------> > CX2388x Card - State 1:> MO_GP0_IO: 000004fb (00000000 00000000 00000100 11111011) (was: 000000ff)> MO_GP1_IO: 0000f39e (00000000 00000000 11110011 10011110) (was: 0000e09f)> MO_GP2_IO: 000000a9 * (00000000 00000000 00000000 10101001) (was: 000000ff)> MO_GP3_IO: 00000000 (00000000 00000000 00000000 00000000) > > > Changes: State 1 -> State 2:> AUD_STATUS: 000001f6 -> 000000f2 (-------- -------- -------1 -----1--) > AUD_NICAM_STATUS1: 0000ef4d -> 0000cc9e (-------- -------- --1---11 01-0--01) > MO_GP2_IO: 000000a9 -> 00000089 (-------- -------- -------- --1-----) > > 3 changes> > > ----------------------------------------------------------------------------------> > CX2388x Card - State 2:> MO_GP0_IO: 000004fb (00000000 00000000 00000100 11111011) > MO_GP1_IO: 0000f39e (00000000 00000000 11110011 10011110) > MO_GP2_IO: 00000089 * (00000000 00000000 00000000 10001001) (was: 000000a9)> MO_GP3_IO: 00000000 (00000000 00000000 00000000 00000000) > > > Changes: State 2 -> Register Dump:> AUD_NICAM_STATUS2: 00000005 -> 00000009 (-------- -------- -------- ----01--) > AUD_STATUS: 000000f2 -> 0000fb76 (-------- -------- 00000-00 1----0--) > AUD_NICAM_STATUS1: 0000cc9e -> 00009f83 (-------- -------- -1-0--00 ---111-0) > MO_GP2_IO: 00000089 -> 000000c9 (-------- -------- -------- -0------) > > 4 changes> > > =================================================================================> > CX2388x Card - Register Dump:> MO_GP0_IO: 000004fb (00000000 00000000 00000100 11111011) > MO_GP1_IO: 0000f39e (00000000 00000000 11110011 10011110) > MO_GP2_IO: 000000c9 (00000000 00000000 00000000 11001001) (was: 00000089)> MO_GP3_IO: 00000000 (00000000 00000000 00000000 00000000) > > end of dump> > > > > > Date: Tue, 29 Apr 2008 04:54:57 -0400> > From: mchehab@xxxxxxxxxxxxx> > To: vjorda@xxxxxxxxxxx> > CC: video4linux-list@xxxxxxxxxx> > Subject: RE: Trying to set up a NPG Real DVB-T PCI Card> >> > This is what we need:> >> >> MO_GP0_IO: 000004fb (00000000 00000000 00000100 11111011)> >> MO_GP1_IO: 000000ff (00000000 00000000 00000000 11111111)> >> MO_GP2_IO: 00000001 (00000000 00000000 00000000 00000001)> >> MO_GP3_IO: 00000000 (00000000 00000000 00000000 00000000)> >> > Those GPIO registers controls external devices. you'll need to start> > regedit before your video app. There's a mode at regspy that tracks> > changes on register. After starting, you'll have those values changed.> >> > The firmware load happens when you change from PAL to NTSC. You may try to> > do this on your software and see what register will change.> >> > For example, let's say that GPIO2 has xc3028 reset pin at bit 1. You'll> > notice something like this, during reset:> >> >> MO_GP2_IO: 00000001 (00000000 00000000 00000000 00000001)> >> MO_GP2_IO: 00000003 (00000000 00000000 00000000 00000011)> >> MO_GP2_IO: 00000001 (00000000 00000000 00000000 00000001)> >> > Cheers,> > Mauro.> > _________________________________________________________________> Tecnología, moda, motor, viajes,…suscríbete a nuestros boletines para estar siempre a la última> Guapos y guapas, clips musicales y estrenos de cine. > > --> video4linux-list mailing list> Unsubscribe mailto:video4linux-list-request@xxxxxxxxxx?subject=unsubscribe> https://www.redhat.com/mailman/listinfo/video4linux-list
_________________________________________________________________
MSN Video. 
http://video.msn.com/?mkt=es-es--
video4linux-list mailing list
Unsubscribe mailto:video4linux-list-request@xxxxxxxxxx?subject=unsubscribe
https://www.redhat.com/mailman/listinfo/video4linux-list