Re: pxa_camera with one buffer don't work

[Stefan Herbrechtsmeier <hbmeier@xxxxxxxxxxxxxxxxxxxx>]

Guennadi Liakhovetski schrieb:
> On Fri, 2 May 2008, Stefan Herbrechtsmeier wrote:
>
>   
> > question: The function pxa_camera_dma_irq reset the passed FIFO channel if an
> > overrun occur.
> > But it should clear the others FIFOs too? Or is this wrong?
> >     
>
> From the datasheet:
>
> "Reset input FIFO (RESETF)-- When set, the FIFO pointers of all three 
> FIFOs are reset. This bit is automatically cleared after resetting the 
> pointers."
>
>   
But only the current DMA channel was stopped.

The V4L2_PIX_FMT_YUYV mode uses only on DMA channel. So there should be 
no difference to RGB / raw mode.

I will going on with porting my system to 2.6.25 and then test again.

Thanks
   Stefan

--
Dipl.-Ing. Stefan Herbrechtsmeier

Heinz Nixdorf Institute
University of Paderborn 
System and Circuit Technology 
Fürstenallee 11
D-33102 Paderborn (Germany)

office : F0.415
phone  : + 49 5251 - 60 6342
fax    : + 49 5251 - 60 6351

mailto : hbmeier@xxxxxxxxxx

www    : http://wwwhni.upb.de/sct/mitarbeiter/hbmeier


--
video4linux-list mailing list
Unsubscribe mailto:video4linux-list-request@xxxxxxxxxx?subject=unsubscribe
https://www.redhat.com/mailman/listinfo/video4linux-list