Re: Beholder card M6 with MPEG2 coder

[Dmitri Belimov <d.belimov@xxxxxxxxx>]

Hi


> no time at all on it yet, but I confirm that you are in the center of
> the trouble and that empress device and pci device are in sync after
> your patch. Mauro might review it, if some time for it, since he did
> the ioctl2 conversion, but he would need a Signed-off-by line from
> you, if we come through with the rest too that way.

Ok. I patch was send.

> Trying ioctls using qv4l2, which works on older versions for me,
> except for setting TV standard and channel from the empress device,
> we see the next oops coming from saa7134-tvaudio now on my saa7134
> device. (there is some little empress code, saa7134 and
> saa7135/saa7131e are different for audio)

This structure used in many functions added by Mauro.

struct saa7134_fh *fh = priv;
struct saa7134_dev *dev = fh->dev;

empress_g_fmt_cap
empress_s_fmt_cap
empress_reqbufs
empress_querybuf
and other

It is correct for this functions?? 

> Frederic on the known previously working empress saa7134 device on the
> dvb LM seems to be quite happy with the snapshot i pointed too. So if
> your card has no further setup problems, mine has, you might try that
> snapshot too to escape the swamps.

I read from /dev/video1 only 0x00 bytes.
For send data from saa7134 to MPEG chip need configure saa7134 output port for video and audio.
I try it now.

With my best regards, Dmitry.

--
video4linux-list mailing list
Unsubscribe mailto:video4linux-list-request@xxxxxxxxxx?subject=unsubscribe
https://www.redhat.com/mailman/listinfo/video4linux-list